6
IM CL250
(3) Connect the other end of the tip of the red test lead the positive side of the
circuit under test and the tip of the black test lead to the negative side.
Take the reading on the display. If the test lead connection is reversed, the
"-" sign is shown on the display.
2.5 AC Voltage Measurements
WARNING
Do not make measurement on a circuit above 750V AC. This may cause
electric shock hazard.
(1) Set the Function Selector switch to the " 400V" or " 750V" position. If
the instrument is in the DC mode, press the
button once to select
AC mode. (The instrument is set to the AC mode when it is powered on.)
The "AC" should be shown on the upper left corner of the display.
(2) Slide the terminal cover to the left. Plug the red test lead into the Hi
terminal and black test lead into the Lo terminal.
(3) Connect the tip of the test leads to the circuit under test. Take the reading
on the display.
