12/12
IM AQ7277B-01EN
Connecting the USB Interface or Ethernet Interface
Connect the USB or Ethernet interface depending on the network you are using.
USB Interface Specifications
Electrical and mechanical specifications: USB 2.0
Connector:
Type B mini (receptacle)
Number of ports:
1
Note
To use the USB interface, you need to obtain the USB driver and communication library.
Download them from the YOKOGAWA Web page.
https://tmi.yokogawa.com/library/
Ethernet Interface Specifications
Number of ports:
1
Electrical and mechanical specifications: IEEE802.3
Transmission system:
Ethernet (10BASE-T/100BASE-TX)
Data rate:
10 Mbps/100 Mbps
Communication protocol:
TCP/IP
Connector: RJ45
Port number:
10001/tcp
Note
• To use the Ethernet interface, you need obtain the communication library.
Download it from the YOKOGAWA Web page.
• To use the Ethernet interface, you need to configure the TCP/IP settings in advance.
Configure them using the dedicated software, Yokogawa OTDR Remote Controller. You can download the software
from the YOKOGAWA Web page.
https://tmi.yokogawa.com/library/
