Preparing for Measurement
3-21
IM AQ6370E-02EN
1
2
3
4
5
6
App
Index
3.6 Wavelength Calibration
WARNING
The instrument has a built-in reference light source for wavelength calibration (when the built-
in light source specification is -L1), and infrared light is always being output from the optical
output connector. Never look into the optical output connector. Infrared light entering the eyes
can cause severe injury and loss of vision.
French
AVERTISSEMENT
Cet instrument dispose d’une source de lumière de référence (-L1 spécification) intégrée
pour l’étalonnage de la longueur d’onde. La lumière infrarouge est toujours émise depuis le
connecteur de sortie optique. Ne regardez jamais directement dans le connecteur de sortie
optique. La lumière infrarouge risquerait de gravement vous blesser ou de provoquer une
perte de vision.
Procedure
Wavelength Calibration Using the Internal Reference Light Source
(when the built-in light source specification is -L1)
1.
Turn the power to the instrument ON.
Turn ON the
MAIN POWER
switch and press the
POWER
switch.
For instructions on turning the power ON and OFF, see section 3.4.
2.
Use a 9.5/125 μm SM optical fiber to connect the instrument’s optical input connector with the
optical output connector.
SM optical fiber
(9.5/125 µm)
AQ6370E
3.
Press the
SYSTEM
key. The SYSTEM menu is displayed.
4.
Tap
Wavelength Calibration
.
5.
Tap
Built-in Source
.
6.
Tap
Execute
. The wavelength is calibrated using the instrument’s built-in reference light
source. Wavelength calibration is executed for several minutes. The previous screen is
displayed again after the calibration process ends.
