2-10
IM AQ6150B-02EN
4.
Press the
YES
soft key.
The shutdown procedure begins.
MORE 1/2
Select
SHUT
DOWN.
Executes
shutdown
Cancels
shutdown
Shutdown
confirmation message
5.
After the POWER switch changes from green to orange, flip the
MAIN POWER
switch on the
rear panel to the “O OFF” position.
Note
If, for some reason, you cannot shut down the instrument normally, you can hold the POWER switch down for
approximately 4 seconds to force the instrument into standby mode. The next time you start the instrument,
the following message will appear. Press any key to clear this message.
The unit was not shutdown properly.
This might cause a hardware problem.
Please follow the shutdown procedure described in the manual.
If you perform this operation, the operating system configuration file will not be backed up, and the instrument
may be unable to start normally.
2.3 Connecting to the Power Supply and Turning the Power Switch On and Off
