YOKOGAWA ADMAG TI Series User Manual Download Page 4

IM 01E21A03-01EN

2

 

 

<1.  Introduction>

2

 Regarding This User’s Manual

•  This manual should be provided to the end 

user.

•  The contents of this manual are subject to 

change without prior notice.

•  All rights reserved. No part of this manual 

may be reproduced in any form without 

YOKOGAWA’s written permission.

•  YOKOGAWA makes no warranty of any kind 

with regard to this manual, including, but not 

limited to, implied warranty of merchantability 

and fitness for a particular purpose.

•  If any question arises or errors are found, or if 

any information is missing from this manual, 

inform the nearest YOKOGAWA sales office.

•  The specifications covered by this manual are 

limited to those for the standard type under the 

specified model number break-down and do not 

cover custom-made products.

•  Note that changes in the specifications, 

construction, or component parts of the 

product may not immediately be reflected in 

this manual at the time of change, provided 

that postponement of revisions will not cause 

difficulty to the user from a functional or 

performance standpoint.

•  This manual is intended for the following 

personnel;  

Engineers responsible for installation and wiring 

of the instrument.

•  To ensure correct use, read this manual and 

the applicable user’s manuals as listed in IM 

01E21A21-01Z1 (Read Me First) thoroughly 

before starting operation. Read the general 

specifications as listed in IM 01E21A21-01Z1 

(Read Me First) for its specification.

 Trademark

•  All the brands or names of Yokogawa 

Electric’s products used in this manual are 

either trademarks or registered trademarks of 

Yokogawa Electric Corporation.

•  All other company and product names 

mentioned in this manual are trade names, 

trademarks or registered trademarks of their 

respective companies.

•  In this manual, trademarks or registered 

trademarks are not marked with ™ or 

®

.

 F

or Safe Use of Product

For the protection and safe use of the product and 

the system in which this product is incorporated, 

be sure to follow the instructions and precautions 

on safety that is stated in user's manual as listed 

in IM 01E21A21-01Z1 (Read Me First) whenever 

you handle the product. Take special note that if 

you handle the product in a manner that violated 

these instructions, the protection functionality of 

the product may be damaged or impaired. In such 

cases, YOKOGAWA shall not be liable for any 

indirect or consequential loss incurred by either 

using or not being able to use the product.

Summary of Contents for ADMAG TI Series
















Reviews: