YOKOGAWA 53005-E, User Manual, Page: 8 / 24

8
Pressing the MEASURE button to turns
ON the power supply. A laser beam emit-
ted and the measurement starts.
In the Normal Measurement mode,
the units takes measurement while
MEASURE button is pressed.
Temperature can be measured while the MEASURE button is being pressed.
Set the bettery supplied as an accessory and operate the unit according to the folloowing procedure.
1
Point the laser beam at a measurement
object and aim it at the center of the area to
be measured. For the distance from this
thermometer to the measuring object, re-
fer to page10.
2
When the MEASURE button is released,
the
“MEAS” and laser beam symbols
go out and
“HOLD” and “C ( ﾟ F)” sym-
bols light up. After the last temperature
value is displayed for 15seconds (HOLD
mode), the power is automatically
turned OFF.
3
Operation
53005-6E 12.5.12 10:04 AM ページ 8