ENGLISH
22
CLEANING AND MAINTENANCE
CAUTION:
Before commencing any of the activities described below, unplug the device.
The device should be cleaned immediately after finishing work as dried up food remains may cause
the accessories to become difficult to disassemble and make the cleaning process difficult.
Do not use erosive cleaning agents to clean any parts of the device.
Do not wash any parts of the device in a dishwasher.
After each cleaning, put a thin layer of vegetable oil on the cutting knife and plates.
1.
Remove all accessories used and disassemble them completely.
2.
Wash each part with warm water and some dishwashing liquid.
3. Rinse each part with warm, clean water.
4. Thoroughly dry off all parts.
5.
Use a damp cloth to clean the body of the grinder, and then dry it off thoroughly.
TROUBLESHOOTING
Problem
Possible cause
Solution
The device does not work
The power plug is
disconnected from the wall
socket.
Connect the power plug to the wall socket.
Grinding chamber or
cutting chamber falls out
of the chamber socket
The accessories are
improperly installed.
Remove the accessories and install them
properly.
Food is not coming out
the outlet port
The device is clogged.
Set the control switch in the “REV” position until
the grinding chamber clears.
Take the juicer off and remove excess pulp.
The device is grinding
poorly
The power setting is too
low.
Set the control switch in the “2” position.
The meat was not cleaned
off and/or the pieces are
too large.
Clean off the meat and/or cut it into smaller
pieces.
The cutting knife was
installed on the wrong
side.
Install the cutting knife with the convex side
facing inwards to the device.
The grinder has
overheated.
Turn the grinder off, unplug it and let it cool
down for at least 60 minutes.
The cutting knife or other
part has worn out.
Replace the worn out part with a new one
recommended by the manufacturer.
The grinder turns off
during operation
The grinder was used for
too long.
Turn the grinder off, unplug it and let it cool
down for at least 60 minutes. Do not operate the
device for longer than 5 minutes at a time.
The meat was not cleaned
off and/or the pieces are
too large.
Clean off the meat and/or cut it into smaller
pieces.
The device is damaged.
Unplug the device and contact customer service.
