ENGLISH
17
6. Ice making cycle begins, ice will be frozen onto the evaporator fingers. The ice making time depends
on the ambient temperature.
7. Once ice making cycle is finished, the water tray will tilt forward; the remaining water flows back to the
water reservoir and the ice cubes will drop from the fingers.
8. In about 15-35 seconds, the water tray will tilt backward, ice cubes will be pushed to ice reservoir
directly, unit back to work from step 4 to step 7 again.
9. Push the ice cube dispenser puncher to get ice cubes.
CAUTION
: Put a cup below the dispenser directly.
NOTE
: If the ice is stored in the unit for long time, the ice may freeze and stick together, then no ice will
be dispensed even the ice is full, if so, please kindly use scoop included in the unit to break the ice first,
then push the puncher button.
10. Press the WATER button to get water.
CAUTION
: Put a cup below the dispenser directly.
NOTE
: If you need to get cold water, at least the ice making function should be turn on.
Please make sure your cup is below the water outlet or water will be splashed everywhere.
11. Press OFF button to stop the unit.
CLEANING AND MAINTENANCE
1.
Before cleaning unplug the unit.
2.
Open the drain pipe to pour out the rest of water, then close the drain pipe.
3.
Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator with a damp cloth and
solution of water and vinegar. Thoroughly clean the device of the cleaning agent before starting.
4.
To clean the outer surface of the appliance use a lightly damp cloth. Then dry it thoroughly with a
soft, dry cloth before using again.
5.
Do not use any cleaning or chemical products of any kind to clean any parts of this product.
6.
Make sure that the ventilation openings on the device are not blocked in any way. Do not use any
mechanical devices or other means to accelerate the defrosting process.
