ENGLISH
15
IMPORTANT INFORMATION
1.
Do not turn the Ice maker upside down, as this may damage the compressor and sealed system.
2.
Remove all packing material and carefully check your ice maker to ensure it is in good condition
and that there is no damage to the ice maker or power cord and plug.
3.
The Ice maker should be placed horizontally on a level surface. To ensure proper ventilation for
your ice maker allow 15 cm of space at the top, the back and on each side. Do not install the Ice
maker near an oven, radiator, or any other heat source.
4.
Before using the Ice maker for the first time, please wait 2 hours after positioning it, and keep the
front lid open for at least 2 hours.
5.
Always keep the viewing window close during ice making.
The ice cube tank is not cooled, closed lid delays melting process of ice cubes.
6.
To ensure ice cubes are clean always use fresh water.
Water in the water reservoir should be replaced every 24 hours.
7.
If the compressor stops for any reason such as water shortage, too much Ice, power off, etc., do not
start the device immediately, wait about 3 minutes, and then re-start the ice maker.
