ENGLISH
16
OPERATING INSTRUCTIONS
1. Plug in the machine into the socket.
2. Open the water reservoir access door and add water as sketch A or connect unit to water faucet as
sketch B.
Sketch A
Add Water by Manual
Sketch B
Connect Unit to Water Faucet
CAUTION
: If the unit is on ice making, indicator
is on, but want to make more ice, then add water
to the water reservoir, but please take out the ice first, then add one full cup of water so as to avoid
overflow of water when the ice melt.
3. Press ON button to start the machine.
4. Water will be pumped into the water tray from the water reservoir automatically, this takes about 30
seconds.
CAUTION
: If no water is pumped to the water tray over two cycles but the water in reservoir is enough,
then please open the drain cap, and let several drops water runs out. Then press OFF and ON button to
restart the unit.
5. Press the button SELECT to choose the ice size you may need.
CAUTION
: When temperature lower than 15
0
C, SMALL size is recommended,
When temperature over 30
0
C, LARGE size ice is recommended.
