ENGLISH
32
CUTTER
Accessory installation
CAUTION:
Before commencing any of the activities described below, unplug the device.
1.
Set the device on a flat, stable surface. Make sure kitchen machine head is lowered and the bowl
is installed according to mixer accessory installation instructions.
2.
Remove the cutting chamber mount cover by pulling it upwards.
3.
Put a chosen grater in the cutting chamber and twist it clockwise until you feel resistance.
4.
Slide the cutting chamber into its mount at a 45° angle to the right. Make sure it is inserted fully.
5.
Twist the cutting chamber counter-clockwise to a vertical position until you hear it click into place.
6.
Insert the cutter food pusher into the opening at the top of the cutting chamber.
Cutting
CAUTION
Be especially careful when using the cutter, because its grate remains uncovered during operation.
Do not put fingers or any other body parts, or objects into the hopper or the outlet port.
1.
Plug the device in.
2.
Turn the device on by putting the control knob in a position from “1” to “8”, depending on the products
used. It is recommended to follow the instructions from the “recommended speed settings and work
times” table.
3.
Remove the food pusher, feed products into the hopper and push them in with the food pusher.
4.
After finishing work, put the control knob in the “OFF” position and unplug the device.
Useful information:
The cutter may also be used to prepare potato pancake pulp, potato dumplings etc.,
as well as grind down vegetables, fruit, or prepare chocolate or coconut chips.
