background image

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World! 

 

YMGI: Your Modern Green Idea 

 

 

 

 

 

LIMITED PRODUCT WARRANTY 

 

Once the installation and successful testing of the system has been completely performed by a qualified licensed/certified 
HVAC  technician/contractor,  the  registration  card/form  is  filled  out completely  and  correctly,  and  filed  along  with  a  valid 
installation  invoice  from  the  contractor  within  7  days  of  the  original  installation,  the  following  standard 

Limited  Product 

Warranty 

is qualified: 

7-years

 on the 

compressor

 and 

2-year

 on 

PARTS ONLY

. There is 

no labor coverage

 
YMGI products are designed and manufactured free from defects in workmanship, and materials for normal use. However, 
if for any reason, including occasionally transporting between YMGI factories/warehouses and your delivery location, you 
discover the unit has issues, YMGI Group will help fiel

d a solution by following YMGI’s established warranty procedures: 

 
Compressor: 

YMGI will warrant the compressor of an YMGI-validated and approved warranty filing, for a period of 7 years 

from the date of successful installation at its original installation location. 

 
Parts: 

YMGI will warrant parts of an YMGI-validated and approved warranty filing, for two years from the date of successful 

installation at original installation location. 
 
All warranty compressors and parts replaced will become the sole property of YMGI Group and must be returned to YMGI 
Group upon request. Warranty parts may be new or refurbished. All parts are tested and approved before shipping.

 

At  no  time  does  YMGI  Group  warrant  labor  cost  of  any  type.  Warranty  will  start  from  the  date  of  successful 
installation at original installation location, or 90 days as of original shipping date from YMGI Group, whichever 
comes first. 
 
This is a standard limited liability warranty and DOES NOT cover the following: 

 

Any damage or repairs to properties, or persons as an incident of or consequence of improper faulty transportation, 
installation, operation, maintenance or service. 

 

Any damage caused by frozen or broken water hoses or refrigeration pipes in the event of equipment failure. 

 

Any damage due to floods, fire, wind, lightening, accidents, corrosive atmosphere or any other conditions beyond the 
control of YMGI Group. 

 

Any damage due to interruption or inadequate electrical service to equipment. 

 

Any products that are installed outside the US or Canada. 

 

Any unit that has been moved from its original installation address. 

 

Any labor costs associated with the installation or service of the unit. 

 

Poor unit performance due to improper unit selection (SEER, Unit size). 

 
To validate the above warranties, ALL of the following conditions must all be fulfilled: 

1. The unit was fully (100%) and successfully installed by a licensed or certified HVAC technician. 
2. The unit was installed following all NEC, state and local codes. 
3. The unit was installed following all the information within the Instructions and User Manuals provided by YMGI Group. 
4. ALL fields, especially the technician-checklist, of the 

Limited Warranty Registration Card/Form 

were filled 

completely by the installing technician and signed by both the installing company technician and the unit owner. 

5.  The 

Limited  Warranty  Registration  Card/Form 

and  a  copy  of  the  original  installing  company's  invoice  have  been 

received by YMGI Group-Warranty Dept., POB 1559, O'Fallon, MO 63366, within 7 days of successful installation. 

 
 
 
 

No warranty filing will be validated or approved, if any one of the above conditions are not met. 

Product registration doesn't guarantee the validity of this limited warranty statement. 

 
 
 
 
 
 
 

 

Summary of Contents for WMMS-09C-V2A(57)2

























































Reviews: