Yinkman Omnos 5.1.2, Quick Start Manual, Page: 18 / 32

18 / 32

Firmware Version: The version for Omnos Soundbar

APP Version: the version for you App
Figure 16. Omnos Play System Page
Wi-Fi Connections

When no Wi-Fi is configured for your Omnos, the Function LED will stay blinking fast.

To connect your Omnos to your home Wi-Fi, follow below steps:

Turn the Omnos AP mode by long pressing the function button for more than 5
seconds.

Turn on the WLAN of your mobile phone and search for an AP named as “Omnos
xxxx” and connect it.

Open “Omnos Play” App and connect your Omnos through AP.

Go to the [ Settings ]

[ Wi-Fi ] page or the [ Connection Status ]

[ Wi-Fi ] page and
search for the available Wi-Fi list for the Omnos

Select your Home Wi-Fi and enter the password for your Wi-Fi

Then switch your mobile App back to your home Wi-Fi.

Switch back to “Omnos Play” App to check the connection with your Home Wi-Fi

If connected, now everything is under control

If not connected, repeat all the above stage and ensure you type the correct
password for your Home Wi-Fi, you can show the password during the type
stage.

When you configure the Wi-Fi for Omnos correctly, the Function LED on the front panel
will stay constant.