YIDIMU Panther, User Manual

Page: 43 / 46

43
（
5
）
Shovel the model
（
Note: The accessories come standard with a blade. If you need
a utility knife, please buy it yourself.
）
（
6
）
Clean the model
Put the model into the configured alcohol box and pour the pure
amount of absolute ethanol into the box for 3-5 minutes.
（
7
）
Drying model
Dry the model surface with a hair dryer (no blower)
（
8
）
curing model
The model is placed in a 405-wavelength UV curing chamber for 3-5 minutes
to achieve the best results on the surface of the model (not available, you can
go to the official website of YIDIMU)
Note: In the case of incomplete printing or printing failure, the resin in
the trough may have some solid residue. It is recommended to filter the