YIDIMU Panther, User Manual

Page: 26 / 46

26
<layer thickness>: the thickness of each layer of the model is generally
0.025/0.05/0.1mm
<Number of bottom layers>: The number of layers to be cured at the bottom of
the model. In order to better adhere to the platform, the parameters of the
bottom layer need to be separately set.
<Exposure time>: Exposure time of the normal layer
<Bottom exposure time>: The exposure time of several layers at the bottom,
the general time will be longer than the normal layer exposure time, and the
resin can be cured as much as possible to ensure sticking to the molding
platform.
<Light out delay>: Calculated from the end of the previous exposure, the final
light-off time = maximum (the total time of the Z-axis up and down movement,
the configured light-off delay)
For example, the Z-axis moves up and down for a period of 6 seconds.
If the "lighting off delay" is set to 10 seconds, the final extinguishing time is 10
seconds.
If the "extinction delay" is set to 1 second, the final off time is 6 seconds.
<Underlighting delay]: The delay time of the bottom layer is calculated as
above.
<Bottom lift distance>: The distance the molding platform lifts when printing the
bottom layers
<lifting distance>: the distance the forming platform lifts when printing in the
normal layer
<Bottom lift speed>: The speed at which the forming platform is lifted when
printing the bottom layers
<lifting speed>: the speed at which the forming platform is lifted when printing
in the normal layer
<Return speed>: the speed at which the forming platform descends