Chapter VII Setting
36
5. After transmission, unplug the USB cable.
[Attention] For data safety, please back up your system data in external storage. Our company has
no responsibility for lost or damage of system data.
[Note] If MASS STORAGE is selected while the GPS navigator is connected with PC, other
operations will be suspended.
[Attention] The following operations will stop suspend the communication of the system and PC
and unsaved data will be lost.
1. Unplugging the MINI USB cable;
2. Powering off the GPS navigator;
3. Resetting the system;
4. Tap the on close button on the top right.
7.9 Navigation Path
Insert a T-flash card with map data into the GPS navigator and tap
to enter the interface
shown as below.
Select a map address and tap
to save the setting.
Tap to select a map address.
Tick in the box to run the set navigation map when the navigator is
powered on.
