Call:
+44 (0)1268 570900
Fax:
+44 (0)1268 732509
Email:
Visit:
www.yewdale.co.uk
5
Instructions for Standard Face Fix Side Channels:
N.B
.
This blind should be installed by a person competent in DIY. If in doubt
please consult a professional.
N.B It is important that the blind is in the headbox with the blind fully retracted
when the side channels are being installed.
1
.
Fix the side channels into the end cheeks with lugs using the supplied 3/16”
screws to secure the headboxes to the side channels through the lugs. To fix
the side channel to the headbox endplate lug, drill a 2mm hole through the
outside of the channel. Fix the bottom angle making sure it is in directly in
line with the headbox.
2
.
The face-fixing side channel must be fixed by drilling 5mm fixing holes
at maximum 1000mm centres, with 9.5mm access holes in the front as
shown below:
N.B Side channels must be fixed square. Check by measuring diagonals.
3
.
Run the blind up and down and close access holes with grommets supplied
when you’re confident that the blind operates correctly.
4
.
Attach the cover onto the headbox by inserting the cover into the headbox
groove. Swing to the closed position and apply and upward pressure to click
the cover into its home position.
5
.
Fix the cover using the two safety screws provided.
5mm hole
9mm hole
