YewdaleDefiant
®
fitting instructions
Part no: 2001
10
Fitting Instructions
YewdaleDefiant
®
cassetted blinds (C40s)
6
.
Use packers if necessary to ensure the sidechannels remain lined up
correctly and level all the way down.
7
.
Check that the side channels are fixed square by measuring diagonals.
8
.
Feed the PVC insert up into the side channel (with the fluted end towards
the headbox) making sure the zip locates within the insert.
9
.
Insert the PVC insert removal tool (sold separately) into the PVC insert
(approx. 20mm from the bottom).
10
.
Run the blind up and down making sure the blind operates correctly. When
the blind is in a closed position, check the distance from the edge of the zip
to the inside of the cheek, both sides need to be equal. Cenralise as required
by sliding the barrel sleeve across. If more or less tension is required on the
fabric, follow the process below. If tension is correct, go to point 13.
11
.
Twist insert the tool by 90 degrees and pull the PVC insert out of the side
channel being careful not to disturb any fixings. When the PVC fins are
visible, simply remove the insert from the side channel using your hand.
PVC insert removal tool: Part Number 930006.
12
.
Undo the fixings and refit where required and repeat process 7 - 9.
13
.
Close access holes with the grommets supplied when you’re confident blind
operates correctly.
14
.
Attach the cover onto the headbox by inserting the cover into the headbox
groove. Swing to the closed position and apply an upward pressure to click
the cover into its home position.
15
.
Fix cover using the two safety screws previously removed.
