8
PROBLEMS AND SOLUTIONS
WARNING! DISCONNECT FROM THE ELECTRICAL POWER SUPPLY BEFORE
CARRYING OUT USER MAINTENANCE.
IF THE MAINS CABLE IS DAMAGED IT MUST BE REPLACED BY THE MANUFACTURER,
OR ITS SERVICE AGENT OR SIMILARLY QUALIFIED PERSON TO AVOID A HAZARD.
Possible problems and solutions
Problem
Probable cause
Possible solution
The machine does
not work.
1. No power supply
2. Faulty power supply.
3. Locking ring of the pump
is too tight.
1. Contact the after-sales service.
No enough water
coming out; uneven
working pressure.
1. The filter is blocked.
2. Inlet
connection
is
connected improperly. Air
remains in the inlet pipe.
3. The valve is blocked.
4. The outlet nozzle is not
smooth.
1. Clean the filter.
2. Check the connection, tighten the
seal. Check whether the hose is
clogged or whether there is no
enough inlet water.
3. Clean the valve and install it
again.
4. Contact the after-sales service.
Water leakage from
the pump.
It’s normal a few drops of
water drip every minute.
Check the sealing if more
water leaks.
1. Contact the after-sales service.
The motor stops
working suddenly.
1. The
pressure
control
works.
2. The thermal protection
may have switched the
motor off to prevent
overheating.
1. Check if the outlet nozzle is
blocked. Clean the nozzle.
2. Turn off the cleaner. Leave the
machine for a few minutes to cool
down.
3. Contact the after-sales service.
INSPECTION & MAINTENANCE
For safety use, make sure a three-month clean the appliance. Inspect the filter and the nozzle
before working to make sure there is no impurity. After working, check there is no water
remained in the pump and the hose.
The appliance should be cleaned before packaging. Store the appliance in a dry place. For
transportation safety, the appliance should comply with ISTA.
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities.
