background image

3

Do not run the cleaner without water which will cause damage to the cleaner.

Before starting the machine, fully open the water supply tap. Be careful not to bend the

hose.

When the machine hose or tube freeze in winter, do not use it. Before storing the water

must be drained from the machine. Always store the pressure washer in a secure dry and
frost protected place

Do not use the machine in a dirty place.

Put the machine on a flat surface.

The sea water is not suitable for using in this machine.

The appliance is not fit for long time industrial use.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

The function of Safety valve: when the pressure of the pump exceeds the Preset valve,

returns the excess fluid to the inlet system.

The function of pressure switch: When turn off a gun, pressure switch on the action, cut off

the power supply for protection operations.

Summary of Contents for 33EPW002-3000P-02










Reviews: