background image

1

GENERAL SAFETY RULES

This machine has been designed for use with the cleaning agent supplied or

recommended by the manufacturer. The use of other cleaning agents or chemicals may
adversely affect the safety of the machine.

Do not use the machine within range of persons unless they wear protective clothing.

Risk of explosion - Do not spray flammable liquids.

High pressure cleaners shall not be used by children or untrained personnel.

Water that has flown through backflow preventers is considered to be non-potable .

Removing the plug from the socket-outlet during cleaning or maintenance and when
replacing parts or converting the machine to another function:

Inadequate extension cords can be dangerous.

Ensure that any exhaust emissions are not in the vicinity of air intakes.

Do not use the appliance without reading the instruction sheet.

The electrical supply connection shall be made by a qualified person and comply with IEC

60364-1. The electric supply to this appliance should include either a residual current
device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30
ms or a device that will prove the earth circuit.

Keep operating area clear of all persons.

High pressure hose, fittings and couplings are important for the safety of the appliance.

Use only hoses, fittings and couplings recommended by the manufacturer.

Do not use the appliance if a supply cord or important parts of the appliance are damaged,

e.g. safety devices, high pressure hose, trigger gun.

If an extension cord is used, the plug and socket must be of watertight construction.

Improper extension cords can be dangerous.

High pressure jets can be dangerous if subject to misuse. The jet must not be directed at
persons, live electrical equipment or the appliance itself.

Do not direct the jet against yourself or others in order to clean clothes or foot-wear.

Disconnect from the electrical power supply before carrying out user maintenance.

To ensure appliance safety, use only original spare parts from the manufacturer or
approved by the manufacturer.

Do not leave the appliance unattended while the machine is running.

Do not use cleaning agents or chemicals in the appliance.

Turn off the appliance if it is in the event of accident (e.g. contact with detergents: rinse
with an abundance of clean water ) or breakdown to prevent unsafe situations.

When the appliance is moving and installing, the appliance must be in flat.

Summary of Contents for 33EPW002-3000P-02










Reviews: