WWW.YES-RC.COM
9
once.
By pressing the “Batt Type/Stop” button repeatedly the main menu will scroll through the differ-
ent charge program options and the user settings option.
To select an option from the main menu press the “Start/Enter” button.
Please consult the end of this manual for a program chart with all the different options of the
I-PEAK 665.
Lithium polymer charge programs
Important!
• The following program is only suitable for charging Lithium-polymer batteries with a nominal
voltage of 3.7V/cell. Do not try to charge any other type of battery using this program.
Individual Cell Connection Diagram shows the correct way to connect your battery to the I-PEAK
665 charger while charging in the balance charge program mode only.
Warning
Failure to connect as shown in Individual Cell Connection Diagram will dam-
age this charger.
This balance charging function is designed for JST-XH balance leads only.
Do not try and fi t any other type of balance lead directly into this chargers
balance ports. (If you are not sure what type of lead you have then check
with your local model shop before connecting to the balance ports on this
charger.)
The main battery leads must be connected along with the balance lead connector before charg-
ing your battery.
Individual Cell Connection Diagram (pin-assignment of 8-pin)
+
+
LiPo 6S
-
+
-
+
-
+
-
+
LiPo 5S
+
3S
-
+
LiPo 4S
-
1cell
2cell
3cell
4cell
5cell
6cell
1cell
2cell
3cell
4cell
5cell
6cell
+
+
2S
LiPo 3S
+
-
-
-
LiPo 2S
-
+
1S
Top View
Top View
+
-
LiPo 1S
-
-
Individual
bal.port
Individual
bal.port
WARNING: If using crock clips make sure they are unable to touch!
Lithium LiLo/LiPo/LiFe program
• The program is only suitable for charging/discharging Lithium-polymer batteries with a nominal
voltage of 3.3/3.6/3.7V/cell.
Different batteries have different charge technique. There are two methods termed as constant
voltage and constant current. The charge current varies according to battery capacity and
specifi cation. The fi nal voltage is very important; it should precisely match the voltage of the bat-
tery: LiPo is 3.6V, LiLo is 4.1V and LiFe is 3.6V. The current and voltage of the battery should be
correctly set.
