WWW.YES-RC.COM
16
NIMH
1.0A 7.42V
D>C
022:45 00890
Battery type
Battery voltage
Elapsed time
Supplied capacity
Discharge or
charge current
When it approaches to the end, you can see the capacity of the bat-
tery being charged or discharged. You can press ”INC”or”DEC” key
to display result of each cycle.
DCHG
1 1314mAh
CHG
1 1430mAh
Data storage program
Store data
For your convenience, I-PEAK 665 has a data storage and load
program. It can store fi ve battery data representing the respective
specifi cations of batteries. You can call back the data when charging
or discharging without setting up the program again.
Select PROGRAM SELECT SAVE DATA from the main menu. Press
“Start/Enter” key to make values blink, and use ”INC”or”DEC” to set
up the parameter.
Setting of the parameter in this screen will not affect the charge and
discharge process. They just represent the specifi cation of the battery. The following screens will
automatically be displayed matched with the battery type you set up. The example is NiMH bat-
tery pack, including 12 cells, the capacity is 3000m Ah.
Set up the charge current in the manual mode, or current limit in the auto
mode. Press ”INC”and”DEC” key simultaneously to make the current fi eld
blink to switch the charge mode.
Set up the discharge current and fi nal voltage.
Set up the charge/ discharge sequence and cycle number.
Saving the data
PROGRAM SELECT
SAVE DATA
SAVE [01] NiMH
14.4V 3000mAh
NiMH CHARGE At*
CUR LIMIT 5.0A
NiMH DISCHARGE*
1.0A
11.0V
NiMH CYCLE *
DCHG>CHG 3
Start
Enter
<”DEC” “INC”>
<”DEC” “INC”>
-
+
<”DEC” “INC”>
-
+
<”DEC” “INC”>
-
+
<”DEC” “INC”>
Start
Enter
Data
number
Voltage
Capacity
Start
Enter > 3 sec
PROGRAM SELECT
LOAD DATA
LOAD [01] NiMH
14.4V 3000mAh
Load ...
Start
Enter
Start
Enter > 3 sec
