Yes Falcon-II, Operation Manual

Page: 16 / 20

16
5.2 DETAILED OPERATING INSTRUCTIONS, CONT’D…..
5.0 DATA LOGGER Mode
The Falcon-OO has a built-in data logger, which can provide users with CO2 and
temperature readings within the past 24 hours.
5.1. Press the Mode button(
⑤),
until DATALOGGER flashes
5.2. Press Enter(
②),
CO2 and Temperature shows up
Press Up/Down(
④/③)
to page up/down the reading .
5.3. Press the Enter(
②),
return to User Mode
6.0 MaxMin Mode
The Falcon-II has a built-in Max-Min mode, which can provide users with the
Maximum and Minimum CO2 readings since the instrument was last switched on.
6.1. Press the Mode button(
⑤),
until MAX MIN flashes.
6.2. Press Enter button(
②),
MAX and MIN CO2 reading shows alternating.
6.3. “CLR” will flash if press Up/Down(
④/③).
Press Enter(
②),
to CLEAR the MAX and MIN record .
6.4. Press Mode or Enter(
⑤),
return to the User Mode.
7.0 rcFSMode:
If the user sets or calibrates the sensor wrong, you can recover the factory setting.
7.1. Press the Mode button(
⑤),
until rcFS flashes on the lower
display
7.2. Press Enter(
②), “
no” shows on the upper display
7.3. Press Up/Dow(
④/③), “
no” change to “yes”, Press Enter(
②),
Factory Setting
will reload, return to the User Mode;
7.4. Press Mode(
⑤),
leave rcFS Mode, return to the User Mode
SPECIFICATIONS (Preliminary Version)