13
75
107
55
108
SEAT ASSEMBLY INSTRUCTIONS
4. Secure the SEAT ASSEMBLY using four 5/16
FLAT WASHERS (101) and four 5/16
NYLOCK NUTS (60).
5. Run pull cord through Eye Bolt(108) and
attach Eye bolt to frame using Nylock Nut(55)
as shown below
NOTE:
The ends of the SHOULDER BELTS
will be mounted onto the sides of the RACK
BRUSH GUARD in step 6 of the BRUSH GUARD
ASSEMBLY INSTRUCTIONS on page 14.
1. Locate the SEAT ASSEMBLY with LAP
BELTS, and SHOULDER BELTS. Insert the
bolt(9) and washers(8)(99) into the bottem of
the SEAT ASSEMBLY as shown.
2. Align the STUDS on the bottom of the SEAT
ASSEMBLY with the SEAT TAB HOLES on the
FUN-KART FRAME.
3. Insert the STUDS into the SEAT TAB HOLES.
SHOULDER
BELTS
SEAT
ASSEMBLY
LAP
BELTS
STUDS
SEAT TAB
FUN-KART
FRAME