12
STEERING WHEEL ASSEMBLY INSTRUCTIONS
STEERING WHEEL CAP
9
55
90
89
1/4
NYLOCK
NUT
STEERING
SHAFT
STEERING
WHEEL
STEERING
SHAFT
STEERING
WHEEL
1/4 - 20 x 1-3/4
HEX HEAD BOLT
1/4 - 20 x 1-3/4
HEX HEAD BOLT
90
89
9
1. Locate the SHOCK ABSORBERS (78) at the
front and rear of the FUN-KART
2. The SHOCKS are pre-set for normal
conditions at the factory.
3. Locate the SHOCK ADJUSTMENT HOLE at
the base of the spring.
4. Place the end of a narrow screwdriver in the
SHOCK ADJUSTMENT HOLE.
5. Turn the SHOCK ADJUSTMENT HOLE
counter-clockwise around the SHOCK to
decrease shock absorption.
6. Turn the SHOCK ADJUSTMENT HOLE
clockwise around the SHOCK to increase
shock absorption.
7. Experiment with the adjustment until the
desired effect is attained.
SHOCK ADJUSTMENT HOLE
SHOCK ABSORBER ADJUSTMENT
SHOCK ABSORBER
78
STEERING WHEEL HARDWARE
Item Description
Qty.
9
BOLT, 1/4"-20 X 1-3/4" HEX
3
55
NUT, 1/4" - 20 NYLOCK
3
A
SCREW
1
PHILLIPS
HEAD
SCREW