YELLOWRIVER YR-1190, User Manual

Page: 3 / 16

YR-1190
-2-
Warning

Please conserve this manual as operation guidance. If you sell this product to other user, please
make sure that they also have this user manual.

Before use this machine, please carefully check if there is any damage during transportation.

Before power on, please make sure that the input voltage is matched.

To avoid electric shock, this lighting machine should be earth,

This lighting is for dry indoor used only.

This lighting should be put in airiness place, at least 50cm away from other article, and make sure
airway is not blocked.

Cut off electric before move, repair and clean the machine.

Strictly forbid to put inflammable article near when this machine is running. Or it will easily build
fire.

The max environment temperature for this machine to run is 40 ℃ , forbid to run it if temperature is
higher than this.

When machine is running, surface temperature of the shell can be up to 60 ℃ , scald will be cause if
touch it.

Safe wire should be used to install machine. Bearing of safe wire should be 3times of the machine
weight.

Stop the machine if running abnormal. And contact the nearest authorized service center. Do not
repair by yourself, unprofessional repair can damage the machine or cause malfunction.

In case electric shock, do not touch electric wire when this unit is running,.

Do not power on and power off the machine in short time, or machine lifespan will be shorter.

When use DMX controller, please make sure that there is no interfering resource(e.g. wireless
intercom, high-frequency radiation source )

To avoid electric shock or fire, forbid to put the machine in rain or wet place.

If problem with shell or lamps, these should be changed before run this unit.
For you safe ， Please read this user manual carefully before turn on this
lighting equipment. This machine should be operated by professional ！