YELLOWRIVER YR-1190, User Manual

Page: 12 / 16

YR-1190
-11-
slaves are controlled by master, running as master.
Controller control Multiple models
：
set all models to the same or different
address value
（
notice
：
before running, all the models should be set to the same
channel model, 9CH/8CH or 5CH/4CH, or they run differently. Address value
should be match with controller’s type and character
）
connect by signal cables,
then all slaves controlled by controller, running the same function as controller
setting.
Mark
：
This model is equipped with 1spm power cable. Bearable load is
no more than 8 model connection. If not follow such requirement and
cause damage or accident, our company will not be responsible for it.
Machine configuration graphic