background image

 

  

General Safety Instructions 

1) 

Know your equipment. 

Read and under-

stand the operation manual and the labels 
affixed to this unit. Learn the applications 
and limitations, as well as the specific poten-
tial hazards of the 

YJ-LTE. 

2)  Use the correct hoses.

 Use only hoses de-

signed for handling of refrigerants. The hose 
should be the minimum length required for 
each job and equipped with a shut-off device 
(such as the  compact ball valve) at the end 
to reduce the   likelihood of refrigerant leaks 
to the atmosphere. For best performance we 
recommend using 3/8” hoses. 

YELLOW 

JACKET hoses are made for almost every 
type of refrigerant. See your local distribu-
tor for more information

.

 

3) Ground all equipment.

 Plug the 

YJ-LTE 

into a properly grounded receptacle.

 

4) 

If the power cord is damaged

, it must be     

replaced by a cord assembly available    
from the manufacturer or distributor where 
purchased. 

6)  Do not pressure test with compressed air.

 

Some mixtures of air and refrigerant have 
been shown to be combustible at elevated 
pressures.

 

7) 

Avoid dangerous environments

. To keep    

operator exposure to a minimum, use the   

YJ-LTE 

only in areas with sufficient      

ventilation.

 

 

Recovery should always be performed in well 
ventilated  areas. Use the

 

YJ-LTE 

only in 

locations where mechanical ventilation which 
provides at least four air changes per hour is  
present, or place the unit 18” above the floor 
during use. 
The

 

YJ-LTE 

should not be used near open 

containers of gasoline or any other flammable 

Table of Contents

 

 

 

 

 

Page 

General 

Safety 

Instructions 

     2-3 

Direct 

Liquid/Vapor 

Recovery     3-4 

  

Push-Pull 

Liquid 

Recovery 

     4-5 

Purging the YJ-LTE 

 

 

 

 

 

Recovery 

Tips 

Techniques 

     6 

Wiring Diagram 

 

 

 

 

 

 

Technical Data  

 

 

 

 

 

 

Warranty  

 

 

 

 

 

 

8

 

Check for damage immediately

.  Prior to     

shipment, all YELLOW JACKET 

YJ-LTE

 

Refrigerant Recovery Systems are com-
pletely tested and inspected to assure com-
pliance with Ritchie Engineering factory 
specifications. 
If the recovery system carton is damaged, 
check contents immediately. Note damage 
on shipper’s Bill of Lading and have ship-
per sign statement. Notify carrier immedi-
ately of the damage to   arrange inspection 
of the recovery system and packaging. The 
CARRIER ALONE is responsible for han-
dling and settling your claim. Ritchie   

Engineering will cooperate in assessing 
damage if the recovery system is returned 
to the factory prepaid. 

Carton contents include: 



YJ-LTE

 Refrigerant Recovery System 



Quick Start Guide 



Important Safety Information 

To validate warranty, registration 
online at www.yellowjacket.com/
resources/product-registration/ within 
10 days. 

IMPORTANT NOTICE TO PURCHASER 

Summary of Contents for YJ-LTE 95730









Reviews: