background image

18 

Ritchie Engineering Co., Inc. 
Recovery Division 
6701 W. 110th St. 
Bloomington, MN 55438 USA 

Phone: 952-943-1333 or 800-769-8370 
Fax:     952-943-1140 or 800-322-8684 

E-mail: [email protected] 
Web Site: www.yellowjacket.com 

Printed in U.S.A   

 

 

 

06/07 FK                                                                               P/N 380466 REV B 

LIMITED WARRANTY 

We guarantee Ritchie YELLOW JACKET

®

 products to be free of defective material and workmanship which 

would affect the life of the product under normal use for the purpose for which it was designed. 

 
This warranty does not cover items that have been altered, abused, misused, improperly maintained, or re-
turned solely in need of field service maintenance. This warranty expressly excludes Vacuum Pump damage 
and failures caused by failure to maintain clean, uncontaminated oil in the pump – the major reason for pump 
returns. Therefore, problems related to non-maintained oil will void this warranty on that part of the product. 
 
This warranty does not cover abuse, damage from over tightening valves, or broken gauges. “Series 41” 
Manifold valves can be reconditioned using replacement seating cylinder 41133. There will be a recondition-
ing charge for manifolds returned to the factory for repair. 
 
If found defective, we will upon compliance with the return instructions either credit, replace, or repair, at our 
option, the defective product provided it is returned within one year of the date of factory shipment (90 days 
for tubing tools). Note: Hoses are Date Coded to help determine age of hose. See recommended hose safety 
inspection procedure. Leak Detectors have date of manufacture label on product. 
 
Correction in the manner provided above shall constitute a fulfillment of all liabilities with respect to the qual-
ity, material and workmanship of the product. 
 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF QUAL-

ITY, WHETHER WRITTEN, ORAL OR IMPLIED. 

 

 

Returns (Warranty) 

For HVAC&R Recovery Units and for Automotive Recovery, Recycle, Recharge equipment, call 1-800-
769-8370 for instructions for service, repair, or return.

 Our automatic series (Models 39870, 39750, 

39751, 39770, 39771, 39830, 39832, 39833, 39840, 39841, 39842, 39843) has a two year full parts and labor 
warranty, the semi– automatics (Models 39710, 39711, 39730, 39731, 39732, and 39733) and hand held ma-
chines (Models 39702 and 39704)  have a full one years parts and labor warranty. For all other products, 
please return warranty items to the main factory in Bloomington, MN, prepaid for credit, replacement, or re-
pair, at our option. No authorization is required. All returns must be PREPAID. On direct drive pumps, many 
of the problems can be solved over the telephone. Call 952-943-1333. 
 

Returns (Non-Warranty) 

Prior authorization must be obtained from home office for non-warranty returns. All returns must be PRE-
PAID. Minimum restocking charge 20% on standard items of current date coding and manufacture. Special 
production items will have a higher restocking charge. Many items shown in our price list are custom-
fabricated to customer’s order. 

Warranty Information

 

Summary of Contents for 39830



















Reviews: