30
EN
No.
Malfunction
Possible Causes
Solutions
7
The water is not coming out of
the Reservoir when Robot is
mopping.
The water inlet filter on the bottom of
Reservoir is clogged.
Unscrew the water inlet on the bottom of Reservoir and
clean the filter.
The Reservoir runs out of water.
Add water into the Reservoir.
The water outlets on the bottom of Robot are
clogged.
Check the water outlets on the bottom and clean.
8
The reservoir drops out of
place during cleaning.
The reservoir is not properly installed.
The reservoir is properly installed when it clicks into
place.
9
The robot does not start
emptying after returning to the
Self-empty Station.
The Dust Container Lid is not closed.
Close the Dust Container Lid.
The Dust Bag is not installed to the Self-
empty Station.
Install the Dust Bag and close the Dust Container Lid.
Manually move The robot to the Self-empty
Station will not trigger self-emptying.
In order to make sure The robot starts self-empty
successfully, avoid picking up and moving the Self-empty
Station during the cleaning.
The robot returns to the Self-empty Station
running Video Manager in the App.
This is normal.
Do Not Disturb mode is enabled in yeedi
App.
This is normal. Disable Do Not Disturb mode in the App,
or start self-emptying manually.
The Dust Bag is full.
Replace the Dust Bag and close the Dust Container Lid.
If the possible causes are excluded, it might
be a component malfunction.
Please contact customer service.
