YEC YZF-R6 SS KIT 2004, Manual

Page: 58 / 73

– 54 –
3-6 Front Wheel Installation Procedure
1. Insert the wheel axle from the left of the vehicle, and tighten the bolt to
specification on the right. (Tightening torque: 80 Nm, 8.0 m·kg) Apply grease to the
contact surface of the bolt .
2. Without temporary fitting, tighten to specification the bolts in order of B and A and
back to B again. (Tightening torque: 17 Nm, 1.7 m·kg)
3. Make sure that the end surface of the wheel axle is flush with the end surface on
the front fork side (the portions A). If not, make them flush by hand or with a rubber
mallet.
4. Without temporal fitting, tighten the bolts in order of D and C and back to D again.
(Tightening torque: 17 Nm, 1.7 m·kg)
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 5SL-25168-00 CAST WHEEL ASSY 1
2 5SL-25181-00 AXLE,WHEEL FR. 1
3 90105-14002 BOLT,FLG 1
4 4XV-25117-00 SPACER,BRG. 1
5 93306-00420 BRG. 2
6 93106-28043 SEAL,OIL 2
7 5SL-2510C-00 COLLAR,ASSY. 2
8 91314-08040 BOLT 4
2 3
3
8
2
8
WWW.PlandeGraissage.ORG