YEC YZF-R6 SS KIT 2004, Manual

Page: 54 / 73

– 50 –
3-4 Engine Mounting Procedure
Strictly follow the steps below. If not, the frame stiffness and handling may be adversely
affected.
1. Before mounting the engine to the frame, install the engine support on the left of
the engine using the bolts . (Tightening torque: 45Nm, 4.5 m·kg)
2. Lightly tighten the 2 engine adjust bolts beforehand on the inside of the rear right
of the frame.
3. Mount the engine on the frame, insert the bolts and from the left at 2 rear
places, and tighten them lightly.
4. Lightly tighten the bolts and , at 4 places, front right/left.
5. Tighten to specification the bolts and at 2 places on front left, starting from the
rear of the body. (Tightening torque: 45Nm, 4.5 m·kg)
6. Tighten to specification the engine adjust bolts toward the engine from the lower
one. (Tightening torque: 7Nm, 0.7 m·kg) Make sure that the engine and the seating
surfaces of the adjust bolts are in contact.
7. Apply grease or engine oil to the threaded portions of the bolts and , and tighten
the nuts to specification from the lower one. (Tightening torque: 45Nm, 4.5 m·kg)
Attach the plugs to the upper holes.
8. Finally, tighten to specification the 2 bolts at the right front from the rear of the
body. (Tightening torque: 45Nm, 4.5 m·kg)
To dismount the engine, reverse the steps.
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 5SL-21270-00 ENGINE SPT.ASSY. 1
2 90110-10008 BOLT,HEX.SOCKET 5
3 5EB-21495-00 BOLT,ADJUSTING 2
4 90105-106A2 BOLT,FLG. 1
5 90105-10042 BOLT,FLG. 1
6 90110-10007 BOLT,HEX.SOCKET 1
7 90179-10696 NUT 2
8 90338-27007 PLUG 2
1
2
3
4 5
2 6
2 6
3
4 5
7
8
2
WWW.PlandeGraissage.ORG