Yeaster MyPBX SOHO, User Manual

Page: 37 / 92

MyPBX-SOHO User Manual
www.yeastar.com Page 37
·Caller ID Number
Define the Caller ID Number to be matched on incoming calls. Leave this field
blank to match any or no DID info.
You can also use a pattern match (e.g. 2[345]X) to match a range of numbers.
The following patterns may be used:
X : Any Digit from 0-9
Z : Any Digit from 1-9
N : Any Digit from 2-9
[12345-9] : Any digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
The ‘.’ Character will match any remaining digits. For example, 9011. will match
any phone number that starts with 9011, excluding 9011 itself.
The ‘!’ will match any remaining digits, and causes the matching process to
complete as soon as it can be determined that no other matches are possible.
Example 1: NXXXXXX will match any 7 digits phone number.
Example 2: 1NXXNXXXXX will match a phone number starting with a 1,
followed by a 3-digit area code, and then 6 digit number.
·Distinctive Ringtone
MyPBX support mapping to custom ring tone files. For example, if you configure
the distinctive ringing for custom ring tone to ‘Family’, the ring tone will be
played if the phone receives the incoming call.
How do I configure distinctive ring tones? Please see
APPENDIX E .
2) Member Trunks
This area allows you to select which trunks will be member trunks for this route.
To make a trunk a member of this route, please move it to the 'Selected' box.
3) During Office Hours
You can choose how to route incoming calls during office hours.
·End Calls
Route the incoming calls to end calls, System will auto hang-up the call.
·Extension
Route the incoming calls to a specific extension.
·Voicemail
Route the incoming calls to extension’s voicemail.
·IVR
Route the incoming calls to a specific IVR.
·Ring Group
Route the incoming calls to a specific Ring Group.
·Conference Room
Route the incoming calls to a specific Conference Room.