Yeaster MyPBX SOHO, User Manual

Page: 24 / 92

MyPBX-SOHO User Manual
www.yeastar.com Page 24
·Strip digits from front
Allows the user to specify the number of digits that will be stripped from the
front of the phone number before the call is placed. For example, if users must
press 0 before dialing a phone number, one digit should be stripped from the
dial string before the call is placed.
·Prepend these digits before dialing
These digits will be prepended to the phone number before the call is placed. For
example, if a trunk requires 10 digit dialing, but users are more comfortable
with 7 digit dialing, this field could be used to prepend a 3 digit area code to all
7 digit phone numbers before calls are placed. When using analog trunks, a 'w'
character may also be prepended to provide a slight delay before dialing.
·Password
The route password can be used to protect this route from being accessed
without a password.
·PIN User
A pin number can be used for security, instead of a password, if set here.
Select a PIN set to use. About PIN User, more information, please see
here .
Note1 : If PIN User is enabled in the route, then the extensions which are
selected in the ‘Member Extensions’ that can make calls via this route without
inputting PIN code. While those extensions that haven’t been selected should
input PIN code when making calls via the route. Please do as the following:
1. Input the ‘PIN User validate code’.
2. Input the PIN code after hearing the prompt.
3. Making calls as per the outbound route.
Note2 : When a PIN is entered while making a call or during a call, that PIN is
included in the call records output by the system. (Each PIN User will have own
call records.)
·Member Extensions
Defines the extensions that will be permitted to use this outbound route.
·Member Trunks
Defines the trunks that can be used for this outbound route.