Yeastar Technology NeoGate TG100 User Manual Download Page 70

Page: 70 / 75

TG100 User Guide

70/75

VoIP Trunk (Account) Status

Status

Description

Unregistered

Trunk registration failed.

Registered

Successful registration, trunk is ready for use.

Request Sent

Registering.

Waiting

Waiting for authentication.

VoIP Trunk (Service Provider) Status

Status

Description

Successful registration, trunk is ready for use.

Unreachable

The trunk is unreachable.

Failed

Trunk registration failed.

Check Network Status

Navigate to

Status

System Status

Network Status

to check the TG gateway’s

network information and MAC address.

If you VLAN or OpenVPN are configured, you can also check the status in this page.

Check System Info

Navigate to

Status

System Status

System Info

to check the TG gateway’s

hardware version, firmware version, disk usage, and memory usage.

Summary of Contents for NeoGate TG100












































































Search results

Summary of Contents for NeoGate TG100

Reviews:

Related manuals for NeoGate TG100

Brands by name

Popular brands

Yeastar Technology NeoGate TG100, User Manual

Search results

Summary of Contents for NeoGate TG100

Reviews:

Related manuals for NeoGate TG100

Brands by name

Popular brands