NeoGate TE100 Administrator Guide
www.yeastar.com Page 30
1) General
·
UDP Port
Port use for sip registrations, Default is 5060.
·
TCP Port
Port use for sip registrations, Default is 5060.
·
TLS Port
Port use for sip registrations, Default is 5061.
·
RTP Port Start
Beginning of RTP port range.
·
RTP Port End
End of RTP port range.
·
DTMF Mode
Set default mode for sending DTMF. Default setting: rfc2833.
·
Max Registration/Subscription Time
Maximum duration (in seconds) of a SIP registration. Default is 3600 seconds.
·
Min Registration/Subscription Time
Minimum duration (in seconds) of a SIP registration. Default is 60seconds.
·
Default Incoming/Outgoing Registration Time
Default Incoming/Outgoing Registration Time: Default duration (in seconds) of
incoming/outgoing registration.
·
Register Attempts
The number of SIP REGISTER messages to send to a SIP Registrar before giving up.
Default is 8 times.
·
Register Timeout
Number of seconds to wait for a response from a SIP Registrar before timed out . Default
is 20 seconds.
·
Calling Channel Codec Priority
Once enabled, when dialing out via SIP/SPS trunks, the codec of calling channel will be
selected in preference. If not, TE100 will follow the priority in your SIP/SPS trunks.
·
DNS SRV Look Up
Please enable this option when your SIP trunk contains more than one IP address.