NeoGate TE100 Administrator Guide
www.yeastar.com Page 25
values are:
inband: Device plays indication tones without answering; not available on all PRI/BRI
subscription lines .
outofband: Device disconnects with busy/congestion information code so the switch will
play the indication tones to the caller. Busy() will now do same as setting PRI_CAUSE=17
and Hangup().
·
Facility Enable
To enable transmission of facility-based ISDN supplementary services (such as caller
name from CPE over facility).
·
NSF
Used with AT&T PRIs. If outbound calls are being rejected due to "Mandatory information
element missing" and the missing IE is 0x20, then you need this setting.
·
CRC
CRC Verification.
·
Codec
Default: A-Law, U-Law.
·
Echo Cancellation
Echo cancel Obviously this disables or enables echo cancellation, it is recommended to
not turn this off.
·
Echo training
In some cases, the echo canceller doesn‟t train quickly enough and there is echo at the
beginning of the call which fades out quickly then.
1)
CallerID Prefix
·
International Prefix
When there are international calls coming in via this BRI trunk, the International Prefix
you have set here will be added before the CID. So you can know this is an international
call before you answer it.
·
National Prefix
When there are national calls coming in via this BRI trunk, the National Prefix you have
set here will be added before the CID. So you can know this is a national call before you
answer it.
·
Local Prefix
When there are Local calls coming in via this BRI trunk, the Local Prefix you have set here
will be added before the CID. So you can know this is a local call before you answer it.
