NeoGate TE100 Administrator Guide
www.yeastar.com Page 13
·
DHCP
If your ISP says that you are connecting through DHCP or a dynamic IP address from
your ISP, perform these steps:
Step1: Select
DHCP
as the WAN Connection Type.
Step2: Click
Save
button to save the settings.
Step3: Reboot the device.
Step4: Check the WAN‟s Status (Status
Network Status).
·
Static IP Address
If your ISP says that you are connecting through a static or fixed IP address from your
ISP, perform these steps:
Step1: Select
Static IP Address
as the WAN Connection Type.
Step2: Enter the IP Address.
Step3: Enter the Subnet Mask.
Step4: Enter the Gateway Address.
Step5: Enter the Primary DNS and Secondary DNS.
Step6: Click the
Save
button to save the settings.
Step7: Reboot the device.
Step8: Check the WAN‟s Status (Status
Network Status).
·
PPPoE
If your DSL provider says that you are connecting through PPPoE or if you
Normally enter a user name and password to access the Internet, perform these
Steps:
Step1: Select
PPPoE
as the WAN Connection Type.
Step2: Enter the User Name.
Step3: Enter the Password.
Step4: Click the
Save
button to save the settings.
Step5: Reboot the device.
Step6: Check the WAN‟s Status (Status
Network Status)
5.1.3 DDNS settings
DDNS(Dynamic DNS) is a method / protocol / network service that provides the
capability for a networked device, such as a router or computer system using the
Internet Protocol Suite, to notify a Domain Name System (DNS) name server to change,
in real time, the active DNS configuration of its configured hostnames, addresses or
other information.