Yeastar Technology MyPBX User Manual Download

Page: 33 / 133

MyPBX Standard User Manual

www.yeastar.com

Page 33

Maximum Channels

Controls the maximum number of outbound channels (simultaneous calls) that
can be used on this trunk . Inbound calls are not counted against the maximum.
Leave blank to specify no maximum.

Codecs

Define the codec for this sip trunk and its priority

Note

: codec can only display when edit it after creating the trunk.

Transport

This will be the transport method used by the SIP Trunk. This method is given by
the SIP trunk provider. The options are UDP (default) or TCP or TLS.

Qualify

Send check alive packets to the sip provider.

DTMF mode

Set default mode for sending DTMF of this trunk. Default setting: rfc2833

2)

DOD Setting

DOD

Direct Outward Dialing Number.

Associated Extension

The extension make call out via BRI Trunk will display the associated DOD.

Summary of Contents for MyPBX






































































































































Search results

Summary of Contents for MyPBX

Reviews:

Related manuals for MyPBX

Brands by name

Popular brands

Yeastar Technology MyPBX, User Manual

Search results

Summary of Contents for MyPBX

Reviews:

Related manuals for MyPBX

Brands by name

Popular brands