Yeastar Technology MyPBX User Manual Download Page 105

Page: 105 / 133

MyPBX Standard User Manual

www.yeastar.com

Page 105

3.8.2 System Logs

You can download and delete the system logs of MyPBX.

Options

Enable Hardware Log

Save the infomation of hardware; (up to 4 log files)

Enable Normal Log

Save the prompt information; (up to 16 log files)

Enable Web Log

Save the history of web operations (up to 2 log files)

Enable Debug Log

Save debug information (up to 2 log files)

Figure 3.8.2

3.8.3 System Info

General

Information about hardware version , firmware version and system uptime.

LAN

Information about hostname, MAC address, IP address, gateway, Primary
DNS and Secondary DNS.

Disk Usage

Disk usage information.

Memory Usage

Memory usage information .

Summary of Contents for MyPBX






































































































































Search results

Summary of Contents for MyPBX

Reviews:

Related manuals for MyPBX

Brands by name

Popular brands

Yeastar Technology MyPBX, User Manual

Search results

Summary of Contents for MyPBX

Reviews:

Related manuals for MyPBX

Brands by name

Popular brands