MyPBX U100/U200 Administrator Guide
17/195
Figure 5-1
·DHCP
If this option is set, MyPBX will use DHCP to get an available IP address from
your local network. Not recommended as without the right IP address you
cannot access MyPBX.
·Enable SSH
This is the advance way to access the device, you can use the putty software to
access the device. In the SSH access, you can do more advanced setting and
debug, it’s disabled by default.
·
Port: the default is 8022; you change it to another one
·Enable FTP
Users will be able to log in MyPBX via FTP if FTP is enabled. You can access FTP
resource on MyPBX via Windows explorer or web browser.
FTP default user: root, password: ys123456
·
Port:
the default is 21; you change it to another one.
·Hostname
Set the host name for MyPBX.
·IP Address
Set the IP Address for MyPBX.
Configuring a static IP address for MyPBX is recommended.
·Subnet Mask
Set the subnet mask for MyPBX.
·Gateway
Set the gateway for MyPBX.
·Primary DNS
Set the primary DNS for MyPBX.
·Secondary DNS
Set the secondary DNS for MyPBX.
·IP Address2
Set the second IP Address for MyPBX.
·Subnet Mask2
Summary of Contents for MyPBX U100
