Yeastar Technology MyPBX U100, Administrator'S Manual

Page: 100 / 195

MyPBX U100/U200 Administrator Guide
100/195
Note: This function only supports T.38 faxes.
·Outbound Routes
Route the incoming calls to a specific outbound route.
This function is mainly used for the connection of two branches.
For example: Company A locates headquarters in the USA with a branch B in
China. A and B both have MyPBX phone systems.
Now if staff of A would like to make a call to a telephone or mobile phone in
China from the extension of A but via the FXS line of B, that can be done by this
configuration.
·Non-office Hours Destination
Configure where to route the incoming calls during non-office hours.
4)
During Holidays
Define where the calls will be routed during Holidays.
·Holiday
Select which defined Holiday to use. When a time is defined in both Business
Days and Holidays, it will be treated as Holidays.
·Destination
Configure where to route the incoming calls during holidays.
5)
Fax Detection
Configure if detecting faxes in this inbound route.
Note: Please choose IVR as the destination above before configuring fax
detection (recommended).
·Destination
Configure where the faxes will be routed when faxes are detected.
·No detect
Do not detect faxes.
·Custom Email
Customize an E-mail address to receive the faxes. You should first configure
the “Voicemail Settings->SMTP Settings for Voicemail” correctly before you use
this option.
·Faxes
Send faxes to an extension. If choosing a FXS extension here, the fax will be
sent to the FXS port selected, you should connect a fax machine to this FXS port.