MyPBX Standard User Manual
www.yeastar.com
Page 127
Figure 3-5
4. Set up Proper Firewall Rules
Note
: Please backup the configurations on backup and restore page before you
go ahead. In the case that you lock the device, you can reset to factory default
and restore the previous configurations. Below example rules works with MyPBX
firmware version 2.15.xx.xx or higher versions.
Step 1
. Enable firewall on firewall page of MyPBX.
Step 2
. Add a common rule to accept local network access.
Create a common rule to allow the all the IP addresses of the local phones to
access MyPBX server. For example, if the IP addresses of the local network are
192.168.5.1-254, the configurations could be as below:
Name
: LocalNetwork
Protocol
: BOTH
Port
: 1:65535
IP
: 192.168.5.0/255.255.255.0
Action
: Accept
Summary of Contents for MyPBX Standard
