Yeastar Technology MyPBX Standard, User Manual

Page: 105 / 152

MyPBX Standard User Manual
www.yeastar.com Page 105
The numbers could be set for alert notification, users can setup multiple
extension and outbound phone numbers. Please separate them by „;‟.
e.g. „500;9911‟, if the extension has configured Follow Me Settings, the call
would go to the forwarded number directly.
· Attmtpts
The attempts to dial a phone number when there is no answer.
· Interval
The interval between each attempt to dial the phone number. Must be greater
than 3 seconds, the default value is 10 seconds.
· Prompt
Users will hear the prompt while receiving the phone notification.
2
）
E-mail Notification Settings
Note : Please ensure that all voicemail settings are properly configured on the
System Settings -> Voicemail Settings page before using this feature.
· E-mail Notification
Whether enable E-mail Notification
· Recipient’ Name
The recipients for the alert notification, and multiple email addresses are
allowed, please separate them by „;‟.
e.g.
123@163.com ; 456@sina.com .
·
Subject
The subject of the alert email.
· Email Content
Text content support for predefined variables. Variable names and
corresponding instructions are as follows:
$(HOSTNAME) Host name
$(LOCALIP) Local IP address
$(SOURCEIP) Attack source IP address
$(DATETIME) Occurred
$(USERNAME) User name
（
WEBLOGIN effective
）
$(DESTMAC) Attacks destination MAC
（
IPATTACK effective
）
$(DESTPORT) Attacks destination Port number
（
IPATTACK effective
）
$(PROTOCOL) Protocol type
（
IPATTACK effective
）
$(INTERFACE) Network interface name
（
IPATTACK effective
）