- 5 -
Temperature limit
Humidity limitation
Atmospheric pressure limitation
We will make available on request circuit diagrams, component part lists, descriptions, calibration
instructions, or other information that will assist service personnel to repair those parts of ME
equipment that are designated by the manufacturer as repairable by service personnel.
2. Safety Precautions
Please read the following precautions carefully to avoid personal injury, device damages or
other possible hazards:
●
Use the device indoors and keep it clean and dry; do not use it under inflammable, explosive, high
temperature and dusty environment;
●
Do not use the device near water; also be careful not to make any kinds of liquid drop onto the
device. Do not place the device in damp or dusty places, nor place it where humidity and temperature
change quickly;
●
When mounting the device on the wall, make sure the wall is able to withstand the weight of 8 kg;
●
When mounting the device on the wall, reserve a gap over 50mm all around the device;
●
The device is hung on the rack. Be careful when touching the device on the wall: Upward
displacement may cause the device unhooked and fall, resulting in personal injury or device failure;
●
Dedicated power adaptor configured for the device should be used:
Model: GSM40A15-P1J (Component of the device), Input 100-
～
240V 1.0-0.5A 50-60Hz,
Output15V 2.67A;
●
Make sure the input voltage is consistent with rated input voltage and the electric wire is correctly
connected and well grounded;
●
Do not use multiperture socket or extend the power cord to insert the plug of the device into power
socket;
●
Unplug power cord and cut off power supply line especially under emergency circumstances; hold
the power plug to pull out it from the socket rather than pulling the power cord;
●
Do not touch the power cord with wet hands. Check the power cord and do not allow the power
