- 19 -
○
4 The test results will be displayed after all the pictures have been determined.
The results of CSF test are for reference only, and cannot be used as clinical evaluation data.
SETTINGS
：
Setting Parameters.
6.1.1.3 Chart display
Aim the signal emitter of the remote controller at the signal receive port of the displayer and then
press the chart key on the controller to select the chart you need.
6.1.2 Recover from screensaver status
The displayer is automatically turned off and enters screensaver status when the device stops working
for 5 minutes (you can also set it to 15 minutes, 45 minutes). Press any key (except device power
on/off button) on the controller to light up the displayer and enter working state.
6.1.3 Device shutdown
Press button
on the remote or power on-off button on the device to turn off the displayer.
6.1.4 Brightness Adjustment
The brightness of the test zone of this device is (80~320) cd/m
2
.
The procedure for adjusting the brightness is described as follows:
Press button
on the remote, choose “system” by pressing
. Move to the screen
brightness option by pressing
. Select Low, intermediate, high and ultrahigh to adjust the
screen brightness and then confirm the settings by press button
for every parameter.
Except brightness, all other parameters have been well set up, please do not make any change.
Otherwise, it may have an impact on the normal use of the LCD visual chart.
