| Audio Settings |
75
6.
Confirm the action.
Setting the Vibrator
By default, the phone simultaneously vibrates and rings when receiving an incoming call.
About this task
It is only applicable to W57R/W59R/W78H.
The following vibration settings are available for the incoming call:
•
Vibrate and Ring
: The handset will simultaneously ring and vibrate.
•
Vibrate
: The handset will vibrate only.
•
Vibrate then Ring
: The handset will vibrate four times and then start ringing.
•
Off
Note:
If the silent mode is activated, the handset will not vibrate and ring.
Procedure
1.
Go to
OK
>
Settings
>
Audio
>
Vibrator
.
2.
Select the desired method.
Setting the Key Tone
If you enable the key tone, the phone will produce a sound when you press the keypad. It is only applicable
to DD phone.
Procedure
1.
Go to
Menu
>
Settings
>
Basic Settings
>
Sound
>
Key Tone
.
2.
Select the desired value from the
Key Tone
field.
3.
Confirm the action.
Disabling the Noise Cancellation
Noise cancellation helps improve intelligibility of speech in noisy environments. You can disable it.
About this task
It is only applicable to W57R/W59R/W73H/W78H.
Procedure
1.
Go to
OK
>
Settings
>
Audio
>
Noise Cancellation
.
2.
Disable the noise cancellation.
3.
Confirm the action.
Summary of Contents for W78H
