Yealink VC110, User Manual

Page: 39 / 159

Getting Started
27
This chapter provides the following basic installation instructions and information for
achieving the best performance from your VC110 video conferencing endpoint. Topics
include:

Endpoint Connection and Installation

Powering the Endpoint On or Off

Setup Wizard

Registration

Idle Screen Display

Navigating Menus on the Display Device

Entering Data and Editing Fields

Endpoint Status
If you require additional information, or assistance to help you use your new phone,
contact your system administrator.
This section introduces the following:

Connecting the VC110 video conferencing endpoint

Installing the VC110 video conferencing endpoint

Installing batteries in the remote control
Note
Up to two display devices can be connected to
the
VC110 all-in-one unit. Because the
display device is not included in the package, you need to purchase it separately if
required. Ensure that the purchased display device supports HDMI input.
When connecting only one display device to the VC110 all-in-one unit, Display1 port is
the only available port. If dual screen mode is required, you can connect another display
device to the Display2 port.
Because DVI cable is tailor-made, please use the Yealink-supplied DVI cable.
To prevent shock, do not connect the power adapter and turn on the power before
connecting all endpoint components.