Yealink VC110, User Manual

Page: 53 / 159

Getting Started
41
If you want to You can
on-screen keyboard.
2. Press the navigation keys on the remote
control to select desired letters.
3. Press to change input method.
4. Press .
5. Press to exit from the on-screen
keyboard.
Entering special characters.
1. Press (Keyboard soft key) to open
the on-screen keyboard. If the endpoint is
in the dialing screen, press
(Keyboard soft key) to open the
on-screen keyboard.
2. Press to switch the input method to
@#%.
3. Press the navigation keys on the remote
control to select desired characters.
4. Press .
5. Press to exit from the on-screen
keyboard.
Delete text you entered.

Press to delete one character at a
time.

Long press for 2 seconds to delete
the entire field of text.
3. Press to save.
When the endpoint is idle, you can view its status via the remote control, video
conferencing phone or web user interface.
Available endpoint status information includes:

System information (device model, firmware, hardware version, product ID and
serial number)

Network status (LAN type, IP address, MAC, subnet mask, gateway and DNS server,
public IP address can also be viewed if the static NAT is enabled)

Account status (register status of SIP account and H.323 account)

Camera (status, device model, SPEC, hardware version and serial number)

Audio (the active audio input and output devices)